Naslov
Influence of SLS processing parameters according to the new mathematical model on flexural properties

Autori
Pilipović, Ana ; Valentan, Bogdan ; Šercer, Mladen

Izvornik
Rapid prototyping journal (1355-2546) 22 (2016), 2; 258-268

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Polymers ; Selective laser sintering ; Mechanical properties

Sažetak
Purpose – The purpose of this paper is the selection of production parameters in selective laser sintering – SLS for the production of quality products (e.g. good mechanical properties). The manufacturing procedure affects the properties, which is especially significant in additive procedures, as the products are not cheap and the procedure and material need to be optimally selected. Design/methodology/approach – The paper presents an analysis of the fabrication parameters in selective laser sintering (SLS) that affect the flexural properties of the finished product. Findings – The influence of a new parameter has been found, the overlay ratio, and using the mathematical and scheme method, the selection of parameters for obtaining the optimal flexural properties has been proposed. Originality/value – The paper presents a new mathematical model for the calculation of the processing parameters in SLS of polymer products and gives a diagram for the determination of which parameters are the best to use for practical purposes.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA