Pregled bibliografske jedinice broj: 811241
Design of Low Power LDO Voltage Regulator for RFID Applications
Design of Low Power LDO Voltage Regulator for RFID Applications // Proc. of the 51 Int. Conf. on Microelectronics, Devices and Materials - MIDEM / Trontelj, Janez ; Topič, Marko ; Seek, Aleksander (ur.).
Ljubljana: Society for Microelectronics, Electronic Components and Materials (MIDEM), 2015. str. 120-123 (predavanje, međunarodna recenzija, sažetak, ostalo)
CROSBI ID: 811241 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Design of Low Power LDO Voltage Regulator for RFID Applications
Autori
Mikulic, Josip ; Bako, Niko ; Baric, Adrijan
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, ostalo
Izvornik
Proc. of the 51 Int. Conf. on Microelectronics, Devices and Materials - MIDEM
/ Trontelj, Janez ; Topič, Marko ; Seek, Aleksander - Ljubljana : Society for Microelectronics, Electronic Components and Materials (MIDEM), 2015, 120-123
ISBN
9789619293355
Skup
51th International Conference on Microelectronics, Devices and Materials
Mjesto i datum
Bled, Slovenija, 23.09.2015. - 25.09.2015
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
RFID; low-power regulator; LDO
Sažetak
This paper proposes the circuit of a low power on-chip voltage regulator. The LDO (low-dropout) voltage regulator is designed in the UMC 0.18 µm CMOS technology by using reverse nested Miller compensation (RNMC). The regulator provides an output DC voltage of 1.455 V with the load capability of 500 µA and the total quiescent current consumption of less than 4 µA. The line and load regulation are 1.25 mV/V and 1.08 mV/mA at 500 µA, respectively. The designed regulator is capable of operating in the temperature range from -20˚C to 60˚C and it is specially suitable for RFID applications.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
