Naslov
The susceptibility to the hydrogen embrittlement of low alloy Cr and CrMo steels

Autori
Gojić, Mirko ; Kosec, Ladislav

Izvornik
ISIJ International (0915-1559) 37 (1997), 4; 412-418

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Low alloy steel; hydrogen embrittlement; Quenching and tempering; Microstructure; Corrosion inhibition; Propargylic alcohol

Sažetak
Low alloy Cr and CrMo steeels have been studied to determine their susceptibility to hydrogen embrittlement. The steels were quenched at a constant cooling rate of 30K/s and tempering at 673 and 973K. hydrogen charging of steels was carried out in 0.5MH2SO4 solution without and with addition of propargylic alcohol as corrosion inhibitor. In spite of the current density of 2-3 mA/cm2 and the applied load of 40% yield strength was found that the steels tempered at 673K were highly sensitive to hydrogen embrittlement. the steels tempered at 973K showed significantly higher resistance to hydrogen embrittlement. In spite of higher strength, the CrMo steel showed higher resistance to hydrogen embrittlement than the Cr steel. the fracture of steels was initiated at the second phase particles followed by transgranular fracture from iron carbide or iron-manganese sulphide inclusions. Since the inclusion distributions are similar in both steels, the enhanced resistance of CrMo steel to hydrogen embrittlement is due to finer prior austenite grain and presence of Mo2C in the ferrite matrix. with the addition of propargylic alcohol in 0.5MH2SO4 solution the resistance of steels to hydrogen embrittlement was increased and fracture surface showed mostly dimple fracture.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

POVEZANOST RADA