Pregled bibliografske jedinice broj: 799920
Analysis of piston microstructure in the most critical zones
Analysis of piston microstructure in the most critical zones // Kovové materiály, 53 (2015), 5; 357-363 doi:10.4149/km_2015_5_357 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 799920 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of piston microstructure in the most
critical zones
Autori
Manasijević, Srećko ; Dolić, Natalija ; Djurdjević, Mile ; Zovko Brodarac, Zdenka ; Radiša, Radomir
Izvornik
Kovové materiály (0023-432X) 53
(2015), 5;
357-363
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
piston ; piston alloy ; microstructure
Sažetak
This paper presents the results of testing the microstructure in the most critical zones of pistons made of aluminum piston alloys. The paper analyzes the shape, size and distribution of primary Si crystals and other phases in three most important piston zones (the edge of the combustion chamber, the area of rings groove and piston pin boss). The phase stoichiometry was identified by comparing the results of EDS analysis with the results reported in the studied literature. The results show that the necessary size, shape and distribution may be obtained in specific zones if appropriate solidification conditions are provided that are necessary for the formation of specific phases.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
Napomena
Glavni autori: Natalija Dolić, Zdenka Zovko Brodarac
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
