Naslov
Influence of fatigue impact loading on radial carrier and rapping device fillet weld strength

Autori
Sertic, Josip ; Samardzic, Ivan ; Kozak, Drazan ; Simunic, Damir ; Gelo, Ivan ; Bucevic-Keran, Dino

Izvornik
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku (1330-3651) 22 (2015), 2; 547-555

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, stručni

Ključne riječi
double fillet weld; fatigue; impact loading; rapping device; strength

Sažetak
The device used to shake off the ash of the steam boiler harp consists of a drive shaft which has radial carriers welded on. During the operation of the waste incinerator steam boiler in Riverside, a fracture of the radial carrier and drive shaft weld occurred. Such a welded T-joint is made as a double fillet weld. It is loaded with the impact loading which causes the fatigue of material because of its repetition. The analytical calculation, with which the load-bearing capacity of the welded joint is determined, is suggested in this paper. The suggested analytical calculation of the mean impact force is based on the law of momentum conservation during the collision of rapping device and elastically deformable heat exchanger harp. The mean impact force is applied for the weld strength calculation. The results showed that the use of double fillet weld loaded with the fatigue impact loading was a bad choice. The suggested analytical calculation model is applicable for the rapping device design.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA