Pregled bibliografske jedinice broj: 783017
Comparison of electrical and electromagnetic properties of a planar inductor
Comparison of electrical and electromagnetic properties of a planar inductor // Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015 38th International Convention on
Opatija, Hrvatska, 2015. str. 83-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 783017 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Comparison of electrical and electromagnetic properties of a planar inductor
Autori
Kundrata , Jurica ; Barić, Adrijan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015 38th International Convention on
/ - , 2015, 83-86
ISBN
978-147-998-174-8
Skup
Information and Communication Technology, Electronics and Microelectronics (MIPRO), 2015 38th International Convention on
Mjesto i datum
Opatija, Hrvatska, 25.05.2015. - 29.05.2015
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
electromagnetic modelling thick film inductor
Sažetak
This paper compares the electromagnetic and electrical properties of a planar inductor used in a low-profile organic light-emitting diode (OLED) driver. A luminary consists of the OLED cell and its driver which uses a planar inductor. The proximity of the OLED cell and the constrained area makes the planar inductor lossy. The planar inductor represents a loop antenna and a main source of radiated emissions of the driver. The properties of the planar inductor are analysed w.r.t. the quality factor and the magnetic moment. The analysis uses a two-level experiment based on EM simulations to explore the geometrical parameters of the inductor. The experiment shows that the track width and the fill-ratio of the inductor have the largest effect on its properties. It is concluded that a planar inductor which introduces minimum power losses and radiated emissions to the OLED driver needs to be optimized w.r.t. the track width and the fill- ratio.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika