Naslov
Optimization of grey cast iron casting technology by numerical simulation

Autori
Zovko Brodarac, Zdenka ; Targuš, Mario ; Dolić, Natalija ; Radoš, Martina

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
47th International October Conference on Mining and Metallurgy Proceedings / Kostov, Ana ; Ljubojev, Milenko - Bor : Mining and Metallurgy Institute Bor, 2015, 355-358

ISBN
978-86-7827-047-5

Skup
47th International October Conference on Mining and Metallurgy

Mjesto i datum
Bor, Srbija, 04.10.2015. - 06.10.2015

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
numerical simulation ; grey iron ; casting ; solidification
(numerical simulation ; gate system ; grey iron ; casting ; solidification)

Sažetak
Recent casting production is impossible without the implementation of new strategies and concepts. The main objectives of these concepts are highly material utilization, with minimal number of forming operations. This scientific work, based on base scientific knowledge about solidification process, resulted in recommendation of gating system geometry for particular casting and cast iron grade. An example of good practice has been shown in developing the casting technology of thin-walled casting, i.e. solid fuel furnace cover. The casting material quality (GJL-100) indicates superior properties, primarily due to short solidification time of thin-walled casting, which ultimately indicates a lower possibility of porosity occurrence.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija

POVEZANOST RADA