Naslov
Deflection determination of the cantilever with variable circular hollow cross-section

Autori
Marović, Pavao ; Galić, Mirela ; Putnik, Gabrijela ; Ljubas, Martin

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
CD Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko - Zagreb : Hrvatsko društvo za mehaniku (HDM), 2015, Marovic-1

ISBN
978-953-7539-21-4

Skup
8th International Congress of Croatian Society of Mechanics

Mjesto i datum
Opatija, Hrvatska, 29.09.2015. - 02.10.2015

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
circula hollow cross-section; cantilever; analytical approach; numerical modelling; experimental testing

Sažetak
One of the every day present engineering structure is cantilever usually loaded with concentrated force at the free end for which the deflection at that point had to be determined. For example, these structures are reinforced concrete poles of the overhead electric distribution network, reinforced concrete wind turbine towers, etc. When the cross-section is constant along the length of the cantilever, there is no problem in determining the deflection of the cantilever’s end point using some classical methods (analytical, grapho-analytical, graphical or numerical). Problems emerge when the cross-section is not constant, i.e. in the situations when the cross-section is linearly variable, especially in the situations when we have nonlinearly variable circular hollow cross-section. All possible situations which can appear are: (a) solid circular cross-section linearly variable along the length ; (b) hollow circular cross-section with constant radius of the inner cavity and linearly variable outer radius (variable thickness of the wall) ; (c) hollow circular crosssection with equally linearly variable inner and outer radiuses (constant thickness of the wall) ; (d) hollow circular cross-section with uneven linearly variable inner and outer radiuses (variable thickness of the wall). This paper describes several possible models for deflection determination of the cantilever end point with variable circular hollow cross-sections. Some investigations have been performed through few diploma theses, and obtained results were compared with experimental ones.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo, Temeljne tehničke znanosti

POVEZANOST RADA