Pregled bibliografske jedinice broj: 774681
OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD
OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD // Journal of trends in the development of machinery and associated technology, 19 (2015), 1; 17-20 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 774681 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD
Autori
Sekulić, Milenko ; Pejić, Vlastimir ; Spaić, Obrad ; Gostimirović, Marin ; Jurković, Zoran
Izvornik
Journal of trends in the development of machinery and associated technology (2303-4009) 19
(2015), 1;
17-20
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Ball-end milling; Taguchi method
Sažetak
This paper outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in ball-end milling when hardened steel. Ball-end milling parameters evaluated are the cutting sped, feed per tooth, depth of cut and radial depth of cut. The experiments were conducted by using L9(34) orthogonal array as suggested by Taguchi. Signal-to-Noise (S/N) ratio and Analysis of Variance (ANOVA) are employed to analyze the effect of ball-end milling parameters on the orthogonal cutting forces in other words to find optimal levels of the process parameters. The study shows that the Taguchi method is suitable to solve the stated problem with minimum number of trials.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
