Naslov
OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD

Autori
Sekulić, Milenko ; Pejić, Vlastimir ; Spaić, Obrad ; Gostimirović, Marin ; Jurković, Zoran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
19th International Research/Expert Conference / Ekinović, S., Vivancos, J., Yalcin, S, - Zenica : Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2015, 17-20

Skup
Trends in the Development of Machinery and Associated Technology TMT 2015

Mjesto i datum
Barcelona, Španjolska, 22.07.2015. - 23.07.2015

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Ball-end milling; Taguchi method

Sažetak
This paper outlines the Taguchi optimization methodology, which is applied to optimize cutting parameters in ball-end milling when hardened steel. Ball-end milling parameters evaluated are the cutting sped, feed per tooth, depth of cut and radial depth of cut. The experiments were conducted by using L9(34) orthogonal array as suggested by Taguchi. Signal-to-Noise (S/N) ratio and Analysis of Variance (ANOVA) are employed to analyze the effect of ball-end milling parameters on the orthogonal cutting forces in other words to find optimal levels of the process parameters. The study shows that the Taguchi method is suitable to solve the stated problem with minimum number of trials.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA