Pregled bibliografske jedinice broj: 763931
Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency
Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency // Interklima 2015, Zbornik sažetaka / Švaić, Srećko ; Boras, Ivanka ; Dović, Damir (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. str. 11-11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 763931 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency
Autori
Rauch, Martina ; Galović, Antun ; Virag Zdravko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Interklima 2015, Zbornik sažetaka
/ Švaić, Srećko ; Boras, Ivanka ; Dović, Damir - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015, 11-11
Skup
23. Međunarodni simpozij o grijanju, hlađenju i klimatizaciji
Mjesto i datum
Zagreb, Hrvatska, 23.04.2015
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
combined Brayton–Rankine cycle; maximum thermal efficiency; optimization
Sažetak
In this paper combined Brayton–Rankine cycle is mathematically simulated. In the Matlab program package an adequate numerical procedure has been developed to determine the maximum thermal efficiency of the combined cycle limited by the temperature of exhaust gases at the entrance of the gas turbine and the temperature of the condensation of water vapor in the steam condenser. Furthermore, additional limitations were introduced: the exhaust gases temperatures at the exit of the gas turbine and dryness fraction at the exit of the steam turbine. Impact of adiabatic flame temperature, temperature difference of the working fluid (water) and the exhaust gases at the pinch point and dryness fraction on change of the overall thermal efficiency of the combined cycle is examined. It is concluded that adiabatic flame temperature has the most impact for the selected intervals of the observed values
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
120-1201760-1757 - Izmjena topline i mase u fluidiziranom sloju
120-1201760-1758 - Metode računalne dinamike fluida (Virag, Zdravko, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb