Naslov
The use of artificial neural network (ANN) for prediction of removal of Co2+ and Ni2+ ions from waste water by electric furnace slag

Autori
Žmak, Irena ; Ćurković, Lidija ; Filetin, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
69th World Foundry Congress 2010, WFC 2010, Volume 3 / - : World Foundry Organization (WFO), 2010, 1082-1086

ISBN
978-162276286-6

Skup
69th World Foundry Congress

Mjesto i datum
Hangzhou, Kina, 16.10.2010. - 20.10.2010

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Artificial neural network; Electric furnace slag; Heavy metals; Sorption

Sažetak
The objectives of this work was the study the removal of Co2+ and Ni2+ ions from aqueous solution by sorption onto five different electric furnace slag. All experiments were performed in batch conditions. The slag was obtained through the manufacturing processes of a fire-resistant cast steel( G-X40CrNiSi25-20) and a low-alloyed Cr-Mo-Ni cast steel, according to its chemical analysis. The sorption of metal ions on the slag depends on the chemical composition of the slag, initial ion concentration and type of the present metal ions. On all the examined electric furnace slag samples, sorption capacity for Ni2+ is higher than for Co2+ . This paper presents the results of application of artificial neural networks in predicting the Co2+ and Ni2+ removal from aqueous solutions. A static multi-layer feed-forward artificial neural network with the back propagation training function and LevenbergMarquardt optimization was used to predict the metal ions removal. The error-back propagation learning algorithm was used, with the assistance of Matlab 7.6.0 (R2008a) Neural network toolbox. The early stopping method was applied, in order to prevent the network from over-fitting. Data used for neural network testing were not used for network training. When experimental data and data obtained by neural network prediction were compared, it was concluded that the applied network model provides very good prediction of the quantity of bound metal ions. The mean error and the standard deviation were found to be very good.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti

POVEZANOST RADA