Pregled bibliografske jedinice broj: 758335
Target acceleration method for analysis of RC structures
Target acceleration method for analysis of RC structures // Engineering computations, 32 (2015), 8; 2235-2258 doi:10.1108/EC-10-2014-0211 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 758335 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Target acceleration method for analysis of RC structures
Autori
Balić, Ivan ; Mihanović, Ante ; Trogrlić, Boris
Izvornik
Engineering computations (0264-4401) 32
(2015), 8;
2235-2258
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Dynamic response; Equivalent structural damping; Linear combination; Multimodal pushover method; Seismic load; Target acceleration
Sažetak
Purpose – The purpose of this paper is to present a new modification of the multimodal pushover method, named the target acceleration method. The target acceleration is the minimum acceleration of the base that leads to the ultimate limit state of the structure, i.e., the lowest seismic resistance. Design/methodology/approach – A nonlinear numerical model is used to determine the target acceleration, which is achieved using the iterative procedure according to the envelope principle. Validation of the target acceleration method was conducted on the basis of the results obtained by incremental dynamic analysis. Findings – The influence of higher modes is highly significant. The general failure vector corresponding to the target acceleration differs from the first load vector and the form of the load with uniform acceleration according to the height of structure, as contained in the European Standard EN 1998-1. Comparison between the target acceleration, including the equivalent structural damping, and the failure peak ground acceleration obtained from the dynamic response of the structure exhibits notably good agreement. This result implies that the equivalent structural damping as calculated according to the formulation presented in this paper should be greater than that suggested in the literature. Originality/value – The originally developed procedure named multimodal pushover target acceleration method can reasonably estimate the minimum acceleration of the base that leads to the ultimate limit state of the structure, and consequently provides a reliable tool for the assessment of the lowest seismic resistance.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Ustanove:
Fakultet građevinarstva, arhitekture i geodezije, Split
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus