Naslov
Woven Fabrics Behavior in Pure Shear

Autori
Penava, Željko ; Šimić Penava, Diana ; Nakić, Marija

Izvornik
Journal of engineered fibers and fabrics (1558-9250) 10 (2015), 4; 114-125

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Anisotropy ; Initial shear modulus ; Pure shear ; Shear angle ; Shear force ; Woven fabric

Sažetak
Shear behavior is one of the most important mechanical characteristics that contributes to the performance and appearance of woven fabrics. Because of anisotropy, shear properties of woven fabric are tested in various directions. This research is focused on the experimental study of shear properties of plain woven fabric when shear force acts on specimens that are cut at different angles to the direction of the weft. Tests were conducted on woven fabric specimens that were fastened in two parallel clamps of the tensile tester. Five cotton woven fabrics of different weft density and of the same warp density were used. The research results show a very high degree of correlation between shear force and its axial component for all directions of the cutting specimen, and likewise between the relative extension of the diagonal of the specimen and the vertical displacement of the specimen. The initial shear modulus of woven fabrics was determined experimentally and theoretically.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo, Tekstilna tehnologija, Temeljne tehničke znanosti

POVEZANOST RADA