Naslov
Spectrofluorometric method for determination of the total mercury content in environmental samples — Waste waters

Autori
Balint, Lazar ; Vedrina-Dragojević, Irena ; Šebečić, Blaženka ; Momirović-Čuljat, Jelena ; Horvatić, Marija

Izvornik
Mikrochimica acta (1966) (0026-3672) 127 (1997), 1-2; 61-65

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
total mercury determination ; spectrofluorometric method ; waste waters

Sažetak
A highly selective spectrofluorometric method for the determination of total mercury (Hg) in waste waters is described. Fluorescence quenching of rhodamine B with Hg(II) in the presence of iodide, after a concentration step, is the basis of this sensitive method. All forms of mercury, including organic compounds, are pre-oxidized to ionic mercury by acidic potassium permanganate. The final and complete oxidation is achieved by adding potassium persulphate and heating. Hg(II) was reduced by tin(II) chloride and Hg vapour driven by an air stream into an absorption solution containing potassium permanganate and sulphuric acid, using a closed, recirculating air stream. In this solution fluorescence quenching of rhodamine B at an excitation wavelength of 485 nm and emission wavelength of 586 nm was measured. The recoveries were done by adding 3.0 μg Hg/100 ml to each sample before the digestion. It was indicated that the recoveries for determining mercury in waste waters were 98.3%– 102.7%. The method gives reliable results down to a concentration of 10 ng Hg/ml waste water.

Izvorni jezik
Engleski

Znanstvena područja
Prehrambena tehnologija

POVEZANOST RADA