Pregled bibliografske jedinice broj: 7339
Calibration of the Nanometer Displacement Measuring Device
Calibration of the Nanometer Displacement Measuring Device // Proceedings of the 41st Annual Conference KoREMA '96, Vol. 1 / Boršić, Mladen (ur.).
Opatija, Hrvatska: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 1996. str. 47-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 7339 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Calibration of the Nanometer Displacement Measuring Device
Autori
Ilić, Damir ; Butorac, Josip
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 41st Annual Conference KoREMA '96, Vol. 1
/ Boršić, Mladen - : Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 1996, 47-52
Skup
KoREMA '96 41st Annual Conference
Mjesto i datum
Opatija, Hrvatska, 18.09.1996. - 20.09.1996
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Sažetak
Because of removing the cosine error during the vertical displacement measurement of high voltage electrodes of the Voltage Balance ETF-84, a special stand has been constructed for positioning a laser head on a part of sphere with maximal angle 6 mrad. Measurement of total (51 mm) and partial (40 mm) displacement had been made in measuring atmosphere of nitrogen, and then in the air of low relative humidity. Sources of errors had been analysed in the measuring chain, refractive indexes had been calculated for the real measurement conditions in nitrogen and air, and acquired measurement results, with relative uncertainties of order of 5x10e-7, or 20 nm absolutely, were presented.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
