Pregled bibliografske jedinice broj: 72852
Heat Transfer in the Fluidized Bed at Superoptimal Fluidization
Heat Transfer in the Fluidized Bed at Superoptimal Fluidization // 12th International Conference on Thermal Engineering and Thermogrammetry / Benko, Imre (ur.).
Budimpešta: Scientific Society of Measurement, Automation and Informatics, 2001. str. 311-317 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 72852 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Heat Transfer in the Fluidized Bed at Superoptimal Fluidization
Autori
Galović, Antun ; Andrassy, Mladen ; Mudrinić, Saša
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
12th International Conference on Thermal Engineering and Thermogrammetry
/ Benko, Imre - Budimpešta : Scientific Society of Measurement, Automation and Informatics, 2001, 311-317
Skup
12th International Conference on Thermal Engineering and Thermogrammetry
Mjesto i datum
Budimpešta, Mađarska, 13.06.2001. - 15.06.2001
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
fluidized bed; spiral tube coil; superoptimal range of fluidization
Sažetak
Experimental results of measured data on realized heta fluxesand corresponding heat transfer coefficients at spiral tube coil probe submerged verticaly to a fluidized systemof quartz and pure air are presented.During the experiments, the fluidized bed was operating in the superoptimal range of gas velocities.This means the coil probe is only partialy submerged into the fluidized bed at rest, so fluidizing gas velocities above the optimum value have to be applied in order to engage the upper parts of the probe in the fluidization heta treansfer conditions.The experiments have been carried out with two awerage sand granulations: 0,358 and 0,630 mm.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
