Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 726700

Shaping the future by innovation in production of vane machines, Croatia


Dabić, Marina; Marijanović, Dalibor
Shaping the future by innovation in production of vane machines, Croatia // SLIM ideas to market - Case Studies / Jennie, Shorley ; John, Williams (ur.)., 2014. str. 9-20


CROSBI ID: 726700 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Shaping the future by innovation in production of vane machines, Croatia

Autori
Dabić, Marina ; Marijanović, Dalibor

Vrsta, podvrsta i kategorija rada
Poglavlja u knjigama, znanstveni

Knjiga
SLIM ideas to market - Case Studies

Urednik/ci
Jennie, Shorley ; John, Williams

Izdavač
Manchester Metropolitan University

Godina
2014

Raspon stranica
9-20

ISBN
978-953-346-000-0

Ključne riječi
innovation, vane machines, knowledge exchange, universities, enterprises

Sažetak
Our case, Shaping the future by innovation in production of vane machines aims to enhance the process of knowledge exchange between universities and enterprises, with the aim of facilitating knowledge co-creation (between universities & enterprises with the support of local/regional authorities) & innovativeness, and by implication competitiveness across Europe. The Banko vane machine essentially represents a new way of greatly improving the performance of vane machines in any product. It is important to note that the improved performance from the Banko vane machine may be applied in all vane machine applications including: pneumatic tools, compressors, expanders for hydrogen fuel cells, pumps (especially vacuum pumps), starters for large diesel engines, and compressors for air pre compression in internal combustion engines (i.e. superchargers). In collaboration with the Zagreb University, BANKO has constructed a vane pneumatic grinder with technical quality that is superior to existing machines on the market The Banko vane machine's potential was recognized by the Government of Croatia's wholly owned business innovation development company, BICRO Ltd (the Business Innovation Center of Croatia). Following a competitive process, BICRO Ltd awarded start-up funding to Banko for project development. This new technology, with its several product applications, is protected by patents. In general, vane machine technology has been unchanged and unimproved for more than half a century. The Banko vane machine supersedes current rotary vane technology making all current vane machine technology increasingly obsolete. In addition, the Banko vane machine outperforms alternative technologies in air compressors, which include reciprocating piston, rotary screw, rotating centrifugal etc. With the rights to these patents, the manufacturer of air compressors or pneumatic tools can greatly improve the product and gain market share at the expense of competitors. The greatly improved efficiency afforded by the Banko vane machine will allow companies owning and operating these units to increase their bottom line. Further, the likely cost of the Banko vane machine is no greater than existing units available on the market, which coupled with its greatly improved efficiency will lead to a quickpayback period for companies that choose to either gradually replace their stock of existing machines and/or add new product lines. The lubricant/oil free nature of the vane machine has increased environmental efficiency, as there are fewer pollutants emitted by the Banko vane machine installed in air compressors.

Izvorni jezik
Engleski

Znanstvena područja
Ekonomija



POVEZANOST RADA


Projekti:
067-0000000-3351 - Menadžerski alati u digitalnom poduzeću (Dabić, Marina, MZOS ) ( CroRIS)

Ustanove:
Ekonomski fakultet, Zagreb

Profili:

Avatar Url Marina Dabić (autor)


Citiraj ovu publikaciju:

Dabić, Marina; Marijanović, Dalibor
Shaping the future by innovation in production of vane machines, Croatia // SLIM ideas to market - Case Studies / Jennie, Shorley ; John, Williams (ur.)., 2014. str. 9-20
Dabić, M. & Marijanović, D. (2014) Shaping the future by innovation in production of vane machines, Croatia. U: Jennie, S. & John, W. (ur.) SLIM ideas to market - Case Studies., Manchester Metropolitan University, str. 9-20.
@inbook{inbook, author = {Dabi\'{c}, Marina and Marijanovi\'{c}, Dalibor}, year = {2014}, pages = {9-20}, keywords = {innovation, vane machines, knowledge exchange, universities, enterprises}, isbn = {978-953-346-000-0}, title = {Shaping the future by innovation in production of vane machines, Croatia}, keyword = {innovation, vane machines, knowledge exchange, universities, enterprises}, publisher = {Manchester Metropolitan University} }
@inbook{inbook, author = {Dabi\'{c}, Marina and Marijanovi\'{c}, Dalibor}, year = {2014}, pages = {9-20}, keywords = {innovation, vane machines, knowledge exchange, universities, enterprises}, isbn = {978-953-346-000-0}, title = {Shaping the future by innovation in production of vane machines, Croatia}, keyword = {innovation, vane machines, knowledge exchange, universities, enterprises}, publisher = {Manchester Metropolitan University} }




Contrast
Increase Font
Decrease Font
Dyslexic Font