Pregled bibliografske jedinice broj: 718960
Numerical Simulation of Wave Loading on Static Offshore Structures
Numerical Simulation of Wave Loading on Static Offshore Structures // Proceedings of the jointly organized 11th. World Congress on Computational Mechanics (WCCM XI), 5th. European Conference on Computational Mechanics (ECCM V), 6th. European Conference on Computational Fluid Dynamics (ECFD VI) / Onate, Eugenio ; Oliver, Xavier ; Huerta, Antonio (ur.).
Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2014. str. 5151-5159 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 718960 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Numerical Simulation of Wave Loading on Static Offshore Structures
Autori
Jasak, Hrvoje ; Gatin, Inno ; Vukčević, Vuko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the jointly organized 11th. World Congress on Computational Mechanics (WCCM XI), 5th. European Conference on Computational Mechanics (ECCM V), 6th. European Conference on Computational Fluid Dynamics (ECFD VI)
/ Onate, Eugenio ; Oliver, Xavier ; Huerta, Antonio - Barcelona : International Center for Numerical Methods in Engineering (CIMNE), 2014, 5151-5159
ISBN
978-84-942844-7-2
Skup
11th. World Congress on Computational Mechanics (WCCM XI), 5th. European Conference on Computational Mechanics (ECCM V), 6th. European Conference on Computational Fluid Dynamics (ECFD VI)
Mjesto i datum
Barcelona, Španjolska, 20.07.2014. - 25.07.2014
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
CFD ; Volume of Fluid ; Two-Phase Flows ; Wave Loads ; OpenFOAM
Sažetak
This paper presents numerical simulations with dominant free surface effects. Wave loads exerted on static offshore structures are calculated. Simulations are carried out using Finite Volume Method (FVM). Mathematical model of two phase incompressible flow is based on Naiver-Stokes equa- tions. Volume of Fluid (VOF) [4] method is used for interface capturing. Waves are generated using relaxation zones principle [3]. Pressure-velocity coupling is obtained by PIMPLE algorithm, a combination of SIMPLE and PISO algorithm. It allows calcula- tions with higher Courant numbers, reducing required computational time. Simulations are calculated with OpenFOAM software package. The method is validated with two test cases. In first simulation truncated vertical cylin- der immersed in water is exposed to incoming waves. Forces on cylindrical column are calculated. Five cases of harmonic waves with different frequencies and wave heights are investigated. Data is compared with experimental results from [2]. The forces on the column in the direction of wave propagation show good agreement with experimen- tally measured forces. The second case describes freak wave initialization and simulation. Finally it is concluded that CFD simulations for given cases give acceptably accurate results.
Izvorni jezik
Engleski
Znanstvena područja
Brodogradnja
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb