Pregled bibliografske jedinice broj: 714783
Impact of strengthening fluids on roughness of 3D printed models
Impact of strengthening fluids on roughness of 3D printed models // Metalurgija, 54 (2015), 1; 231-234 (međunarodna recenzija, prethodno priopćenje, znanstveni)
CROSBI ID: 714783 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Impact of strengthening fluids on roughness of 3D printed models
Autori
Galeta, Tomislav ; Šimunović, Goran ; Mazurek, Miroslav
Izvornik
Metalurgija (0543-5846) 54
(2015), 1;
231-234
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopćenje, znanstveni
Ključne riječi
surface roughness ; strengthening fluids ; 3D printing
Sažetak
For some applications, 3D printed parts usually do not have satisfactory mechanical properties, so to broaden their us-age, additive technologies should be combined with the well-known metallurgical processes, such as investment and others casting techniques. 3D printing developers persistently introduce new base materials and strengthening fluids which may cause different surface roughness. Therefore, in this paper, the authors have tested the roughness of 3D printed samples strengthened with common, but also with alternative fluids. Measurements proved that fluids do have significant influence on the roughness.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Raos, Pero, MZOS ) ( CroRIS)
152-1521781-2235 - Razvoj ERP sustava za digitalno poduzeće (Šarić, Tomislav, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
