Naslov
Numerical investigation of heat transfer enhancement in a fin and tube heat exchanger using vortex generators

Autori
Delač, Boris ; Trp, Anica ; Lenić, Kristian

Izvornik
International journal of heat and mass transfer (0017-9310) 78 (2014); 662-669

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
heat exchanger; vortex generator

Sažetak
In presented work, numerical analysis of heat transfer and pressure drop using vortex generators in fin and flat tube heat exchanger has been presented. Conjugate heat transfer 3D numerical model has been developed and successfully carried out. Rectangular winglets were set in pairs, with downstream orientation. The effects of impact angles of 5°, 10° and 20° as well as winglet height were examined through Nu number and j/f factor. Reynolds number is ranged from 350 to 2200. The numerical results showed that in the range of the present study, the variation of these parameters can result in the increase of heat transfer but with a penalty of pressure drop. Pressure drop increases for larger impact angles and with winglet height. Optimum heat transfer without significant pressure drop increase gives the vortex generator geometry of 0.64 × 1.92 mm (i.e. winglet height equals 2/3 fin spacing) with impact angle 10°.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA