Pregled bibliografske jedinice broj: 70760
Low-Sensitivity SAB Band-Pass Active-RC Filter Using Impedance Tapering
Low-Sensitivity SAB Band-Pass Active-RC Filter Using Impedance Tapering // Proceedings of The 2001 IEEE International Symposium on Circuits and Systems, Vol. I / Skellern, David; Hellestrand, Graham (ur.).
Sydney: Institute of Electrical and Electronics Engineers (IEEE), 2001. str. 160-163 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 70760 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Low-Sensitivity SAB Band-Pass Active-RC Filter Using Impedance Tapering
Autori
Jurišić, Dražen ; Moschytz, George S. ; Mijat, Neven
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of The 2001 IEEE International Symposium on Circuits and Systems, Vol. I
/ Skellern, David; Hellestrand, Graham - Sydney : Institute of Electrical and Electronics Engineers (IEEE), 2001, 160-163
Skup
2001 IEEE International Symposium on Circuits and Systems
Mjesto i datum
Sydney, Australija, 06.05.2001. - 09.05.2001
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
low-sensitivity; single-amplifier biquad; active-RC filters; impedance tapering
Sažetak
The design procedure of low-sensitivity second-and third-order class-4 Sallen and Key active resistance-capacitance (RC) allpole filters, using impedance tapering, has already been published. There a ladder structure in the positive feedback loop of an operational amplifier was used. In this paper desensitization using impedance tapering is applied to class-3 circuits with negative feedback referred to as a single-amplifier biquad (SAB). The RC-section in the negative feedback loop is impedance scaled upwards, from the driving source to the negative amplifier input. Second-order band-pass filters are considered. The improvement comes free of charge; component count and topology remain unchanged, whereas the component values, selected for impedance tapering, account for the significant decrease in sensitivity to component tolerances.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika