Pregled bibliografske jedinice broj: 705267
THE REPRODUCIBILITY OF COATING THICKNESS MEASUREMENT RESULTS
THE REPRODUCIBILITY OF COATING THICKNESS MEASUREMENT RESULTS // MATRIB 2014 MATERIALS, WEAR, RECYCLING
Vela Luka, 2014. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 705267 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
THE REPRODUCIBILITY OF COATING THICKNESS MEASUREMENT RESULTS
Autori
Runje, Biserka ; Alar, Vesna ; Alar, Željko ; Stojanović, Ivan ; Marković, Marija
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
MATRIB 2014 MATERIALS, WEAR, RECYCLING
/ - Vela Luka, 2014
Skup
MATRIB 2014 MATERIALS, WEAR, RECYCLING
Mjesto i datum
Vela Luka, Hrvatska, 26.06.2014. - 28.06.2014
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
dry film thickness; surface roughness; sandblasting; reproducibility
Sažetak
This paper deals with research pertaining to the influence of surface roughness on the reproducibility of coating thickness measurement results. These measurements were carried out on four sandblasted samples by using the gages QuaNix 1500 and Elcometer 456. The surface roughness of these samples ranged from Rz = 30 μm to Rz = 130 μm. The influence of the gage adjustment on the measurement results of coating thickness was specifically analyzed.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
