Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 704213

Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel

Cajner, Franjo; Landek, Darko; Kumić, Ivan; Kovačić, Saša; Rafael, Hrvoje
Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 459-466 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

CROSBI ID: 704213 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel

Autori
Cajner, Franjo ; Landek, Darko ; Kumić, Ivan ; Kovačić, Saša ; Rafael, Hrvoje

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas - München : Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014, 459-466

ISBN
978-000000000-2

Skup
European Conference on Heat Treatment and 21st IFHTSE Congress

Mjesto i datum
München, Njemačka, 12.05.2014. - 15.05.2014

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
deep cryogenic treatment; PM S390 MC; high speed steel; abrasion wear; erosion wear

Sažetak
Advantages of applying deep cryogenic treatment (DCT) after the quenching of high speed steels are well documented in references. But still there are no fully established methods for testing wear resistance that would clearly distinguish the impact of DCT from the impact of other stages in the heat treatment process on the steel tribological properties. In search of solutions to this problem, the own abrasive and erosive wear tests were carried out on the samples made from PM S390 MC high speed steel quenched with three different austenitizing temperatures, with and without DCT prior to tempering. Erosive wear testing was conducted with jets directed to the tested surface at angles of entry of 90 or 30 degrees, which generated cases of impact erosion or abrasion erosion. Test results have shown an increased resistance to impact erosion on deep cryogenically treated samples, as opposed to the conventionally heat treated samples which have showed an increased resistance to abrasion erosion and pure abrasion, with a significant influence of austenitizing temperature.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA

Projekti:
120-1201833-1791 - Inženjerstvo površina u proizvodnji konstrukcijskih dijelova i alata (Cajner, Franjo, MZOS ) ( CroRIS)

Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb

Profili:

Avatar Url Saša Kovačić (autor)

Avatar Url Ivan Kumić (autor)

Avatar Url Hrvoje Rafael (autor)

Avatar Url Franjo Cajner (autor)

Avatar Url Darko Landek (autor)

Citiraj ovu publikaciju:

Cajner, Franjo; Landek, Darko; Kumić, Ivan; Kovačić, Saša; Rafael, Hrvoje
Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 459-466 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Cajner, F., Landek, D., Kumić, I., Kovačić, S. & Rafael, H. (2014) Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel. U: Zoch, H., Schneider, R. & Lübben, T. (ur.)Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress.
@article{article, author = {Cajner, Franjo and Landek, Darko and Kumi\'{c}, Ivan and Kova\v{c}i\'{c}, Sa\v{s}a and Rafael, Hrvoje}, year = {2014}, pages = {459-466}, keywords = {deep cryogenic treatment, PM S390 MC, high speed steel, abrasion wear, erosion wear}, isbn = {978-000000000-2}, title = {Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel}, keyword = {deep cryogenic treatment, PM S390 MC, high speed steel, abrasion wear, erosion wear}, publisher = {Arbeitsgemeinschaft W\"{a}rmbehandlung und Werkstofftechnik e. V. (AWT)}, publisherplace = {M\"{u}nchen, Njema\v{c}ka} }
@article{article, author = {Cajner, Franjo and Landek, Darko and Kumi\'{c}, Ivan and Kova\v{c}i\'{c}, Sa\v{s}a and Rafael, Hrvoje}, year = {2014}, pages = {459-466}, keywords = {deep cryogenic treatment, PM S390 MC, high speed steel, abrasion wear, erosion wear}, isbn = {978-000000000-2}, title = {Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel}, keyword = {deep cryogenic treatment, PM S390 MC, high speed steel, abrasion wear, erosion wear}, publisher = {Arbeitsgemeinschaft W\"{a}rmbehandlung und Werkstofftechnik e. V. (AWT)}, publisherplace = {M\"{u}nchen, Njema\v{c}ka} }

Podijeli:





Contrast
Increase Font
Decrease Font
Dyslexic Font
CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.