Pregled bibliografske jedinice broj: 703242
Determination of elastic modulus of woven fabrics under uniaxial tension in arbitrary direction
Determination of elastic modulus of woven fabrics under uniaxial tension in arbitrary direction // Proceedings of 52nd International Conference on Experimental Stress Analysis 2014 / Polach, Pavel ; Stuna, Lukaš (ur.).
Plzeň: Czech Society of Mechanics, 2014. str. 141-142 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 703242 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Determination of elastic modulus of woven fabrics under uniaxial tension in arbitrary direction
Autori
Šimić Penava, Diana ; Penava, Željko ; Knezić, Željko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 52nd International Conference on Experimental Stress Analysis 2014
/ Polach, Pavel ; Stuna, Lukaš - Plzeň : Czech Society of Mechanics, 2014, 141-142
ISBN
978-80-261-0376-9
Skup
EAN 2014, 52nd international conference on experimental stress analysis
Mjesto i datum
Mariánské Lázně, Češka Republika, 02.06.2014. - 05.06.2014
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
anisotropy; elastic modulus; orthotropic; uniaxial tensile; woven fabric; weaves.
Sažetak
Anisotropy is the characteristic which is typical for most materials, especially woven fabrics. Influence of direction of tensile force action on the properties of the fabric is big and frequently tested. The woven fabric can be defined as orthogonal elastomer. The values of elastic modulus of woven fabrics for different angles of extension direction were analyzed. Three types of fabric samples of different weaves (plain, twill, sateen) and the same raw material composition were tested under tensile forces in seven directions oriented with 15° increment with respect to the weft direction. Elastic modulus of woven fabrics was determined experimentally in the laboratory. Based on the experimentally obtained values, theoretically calculated elastic modulus for arbitrarily chosen fabric directions was calculated. A good agreement between experimental results and the calculated obtained values of the elastic modulus was shown, so the theoretical equations can be used with high accuracy to calculate the elastic modulus of the fabric in various directions. Therefore, the measurements need to be implemented when the tensile force acting on the fabric only in the warp (90°), weft (0°) and at angle of 45°.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Tekstilna tehnologija
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb,
Tekstilno-tehnološki fakultet, Zagreb
