Pregled bibliografske jedinice broj: 702837
Corrosion behaviour of Nitinol in the simulated physiological solution
Corrosion behaviour of Nitinol in the simulated physiological solution // Proceedings of XVI YuCorr International Conference / Pavlović, Miomir ; Dekanski, Aleksandar ; Panić, Vladimir (ur.).
Beograd: Serbian Society of Corrosion and Materials Protection, 2014. str. 132-138 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 702837 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Corrosion behaviour of Nitinol in the simulated physiological solution
Autori
Kožuh, Stjepan ; Gojić, Mirko ; Vrsalović, Ladislav ; Kosec, Borut ; Gudić, Senka ; Štrkalj, Anita
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of XVI YuCorr International Conference
/ Pavlović, Miomir ; Dekanski, Aleksandar ; Panić, Vladimir - Beograd : Serbian Society of Corrosion and Materials Protection, 2014, 132-138
ISBN
978-86-82343-21-9
Skup
XVI YuCorr International Conference
Mjesto i datum
Tara, Srbija, 27.05.2014. - 30.05.2014
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
NiTi alloy ; corrosion rate ; potentiodynamic polarization ; EIS ; dissolved nickel
Sažetak
In this work the corrosion properties of Nitinol (NiTi alloy) was studied using different electrochemical techniques such as open circuit potential measurement, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The concentration of dissolved nickel from alloy in 0.9% NaCl solution after EIS measurements was measured with a high- performance atomic absorption spectrometer. Sample made from NiTi alloy with diameter of 4 mm was used. Corrosion properties were tested in 0.9 % NaCl solution at pH=7.4 and temperature 37 °C (simulated body fluid). The NiTi alloy is characterized by a relatively small passive region which indicates the susceptibility for localized corrosion, but the corrosion rate is very low. The oxide film formed on NiTi alloy surface has a double-layer structure consisting of a barrier-type inner layer and a porous outer layer. Also, dissolved nickel ions concentration after 24 hours of the NiTi immersion in 0.9 % NaCl solution is smaller than the daily dietary intake level.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Metalurgija
POVEZANOST RADA
Projekti:
Potpora 2 - Mirko Gojić
Ustanove:
Kemijsko-tehnološki fakultet, Split,
Metalurški fakultet, Sisak
Profili:
Ladislav Vrsalović
(autor)
Stjepan Kožuh
(autor)
Mirko Gojić
(autor)
Anita Štrkalj
(autor)
Senka Gudić
(autor)