Pretraga

Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 697332

ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION

Hloch, S.; Hlaváček, J.; Vasilko, K.; Cárach, J.; Samardžić, ivan; Kozak, Dražan; Hlavatỳ, I.; Ščučka, J. J.; Klich; Klichová, D.
ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION // Metalurgija, 53 (2014), 4; 537-540 (međunarodna recenzija, članak, znanstveni)

CROSBI ID: 697332 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION

Autori
Hloch, S. ; Hlaváček, J. ; Vasilko, K. ; Cárach, J. ; Samardžić, ivan ; Kozak, Dražan ; Hlavatỳ, I. ; Ščučka, J. J. ; Klich ; Klichová, D.

Izvornik
Metalurgija (0543-5846) 53 (2014), 4; 537-540

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
titanium; abrasive waterjet turning; traverse speed

Sažetak
The paper deals abrasive waterjet titanium tangential turning. Titanium grade 3 with a diameter of 55 mm was used as an experimental material. Technological conditions of turning tests were the same by gradually changing value of traverse speed (vf=1, 5 ; 3 ; 4, 5 ; 6 ; 7, 5 mm*min^-1). Experiment tests were performed by using continuous abrasive waterjet of pressure p=400MPa, by rotation n=60rpm of workpiece. The abrasive particles (Barton Garnet) were fed to the waterjet in the amount of 0, 4kg*min^-1. It was determined that acceleration of traverse speed did not increase the surface profile parameters.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo



POVEZANOST RADA

Projekti:
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Kozak, Dražan, MZOS ) ( CroRIS)
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Raos, Pero, MZOS ) ( CroRIS)
152-1521473-1476 - Suvremene tehnologije spajanja lakih strojarskih konstrukcija (Samardžić, Ivan, MZOS ) ( CroRIS)

Ustanove:
Strojarski fakultet, Slavonski Brod

Profili:

Avatar Url Drazan Kozak (autor)

Avatar Url Ivan Samardžić (autor)

Citiraj ovu publikaciju:

Hloch, S.; Hlaváček, J.; Vasilko, K.; Cárach, J.; Samardžić, ivan; Kozak, Dražan; Hlavatỳ, I.; Ščučka, J. J.; Klich; Klichová, D.
ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION // Metalurgija, 53 (2014), 4; 537-540 (međunarodna recenzija, članak, znanstveni)
Hloch, S., Hlaváček, J., Vasilko, K., Cárach, J., Samardžić, i., Kozak, D., Hlavatỳ, I., Ščučka, J., Klich & Klichová, D. (2014) ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION. Metalurgija, 53 (4), 537-540.
@article{article, author = {Hloch, S. and Hlav\'{a}\v{c}ek, J. and Vasilko, K. and C\'{a}rach, J. and Samard\v{z}i\'{c}, ivan and Kozak, Dra\v{z}an and Hlavatỳ, I. and \v{S}\v{c}u\v{c}ka, J. J. and Klichov\'{a}, D.}, year = {2014}, pages = {537-540}, keywords = {titanium, abrasive waterjet turning, traverse speed}, journal = {Metalurgija}, volume = {53}, number = {4}, issn = {0543-5846}, title = {ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION}, keyword = {titanium, abrasive waterjet turning, traverse speed} }
@article{article, author = {Hloch, S. and Hlav\'{a}\v{c}ek, J. and Vasilko, K. and C\'{a}rach, J. and Samard\v{z}i\'{c}, ivan and Kozak, Dra\v{z}an and Hlavatỳ, I. and \v{S}\v{c}u\v{c}ka, J. J. and Klichov\'{a}, D.}, year = {2014}, pages = {537-540}, keywords = {titanium, abrasive waterjet turning, traverse speed}, journal = {Metalurgija}, volume = {53}, number = {4}, issn = {0543-5846}, title = {ABRASIVE WATERJET (AWJ) TITANIUM TANGENTIAL TURNING EVALUATION}, keyword = {titanium, abrasive waterjet turning, traverse speed} }

Časopis indeksira:


  • Web of Science Core Collection (WoSCC)
    • Science Citation Index Expanded (SCI-EXP)
    • SCI-EXP, SSCI i/ili A&HCI
  • Scopus

Podijeli:





Contrast
Increase Font
Decrease Font
Dyslexic Font
CROSBI koristi kolačiće (cookies) kako bi poboljšao funkcionalnost stranice.