Naslov
Comparison of Colorimetric Values of Prints Made with Cyan Ink on Different Polymer Materials

Autori
Petric Maretić, Katja ; Bates, Irena ; Modrić, Damir

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Procedia Engineering, Volume 69 / Branko Katalinic - : Elsevier, 2014, 1556-1561

Skup
24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013

Mjesto i datum
Zadar, Hrvatska, 23.10.2013. - 26.10.2013

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
polymer material; uneven coverage of the ink; surface tension

Sažetak
Flexographic printing process has been established as a very competitive printing method and a broadly used printing technique. Consequently, as a more demanding packaging printing has to be performed, flexographic printing process became a strong competition to the gravure printing process. It is a quality and cost-effective printing technique used in respect to various types of substrates. This research analysis was focused on testing flexographic prints on six different polymer materials. Namely, it is mandatory for good quality prints to have good coverage even at low film thicknesses when printed on the printing substrate and the previously printed ink film, respectively. Therefore, the acceptance of cyan ink to the different polymer printing substrates and acceptance to the previously applied white ink were analysed. A number of samples of cyan ink acceptance with various viscosities were compared with each other by using spectrophotometric values converted into colorimetric values L*, C*, h˚.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA