Pregled bibliografske jedinice broj: 692476
Influence on warp density on phisical-mechanical properties of coated fabric
Influence on warp density on phisical-mechanical properties of coated fabric // Procedia Engineering 69 / Katalinic, B. (ur.).
Zadar, Hrvatska: Elsevier, 2014. str. 881-889 doi:10.1016/j.proeng.2014.03.066 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 692476 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence on warp density on phisical-mechanical
properties of coated fabric
Autori
Kos, Ivana ; Gudlin Schwarz, Ivana ; Suton, Katarina
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Procedia Engineering 69
/ Katalinic, B. - : Elsevier, 2014, 881-889
Skup
24th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2013
Mjesto i datum
Zadar, Hrvatska, 23.10.2013. - 26.10.2013
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
multicomponent materials ; coated fabric ; polyurethane coating ; fabric density ; physical-mechanical properties
Sažetak
This paper examines the influence of different warp densities on changes of relevant physical- mechanical properties of coated fabrics. Coating process of cotton fabric was performed by polyurethane coating.In order to examine the impact of polyurethane coating on the properties of multi-component materials, with a fabric as a basic component, tests were carried out on the fabricwith different warp densities: 24, 22, 20, 18 and 16 threads/cm before polyurethane coating. Weft density did not change and for all samples remained the same (11 threads/cm). The results of the study indicate that physical- mechanical properties of fabric, with different warp densities, before coating, differ fromphysical-mechanical properties of coated fabric with respectivelydifferent warp densities. Just minimal warp density reduction leads to significant change of the basic fabric properties, as well as the properties of multi- component material with appurtenant fabric. Changes in warp density provide significant correlation coefficients between the warp density and physicalmechanical properties of fabrics and multi-component materials. This research proved existence of significant influence of fabric parameters on the properties and qualitative characteristics of an end product.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
117-0000000-1376 - Napredne tehničke tkanine i procesi (Kovačević, Stana, MZOS ) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
