Pregled bibliografske jedinice broj: 691297
Influence of polishing technique on surface quality parameters of Cerec Vita Mark 2 ceramic inlays
Influence of polishing technique on surface quality parameters of Cerec Vita Mark 2 ceramic inlays // Dental Traumatology
Verona, Italija, 2010. (poster, međunarodna recenzija, sažetak, ostalo)
CROSBI ID: 691297 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of polishing technique on surface quality parameters of Cerec Vita Mark 2 ceramic inlays
Autori
Glavina, Domagoj ; Mahović, Sanjin ; Goršeta, Kristina
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, ostalo
Izvornik
Dental Traumatology
/ - , 2010
Skup
16th World congress on dental traumatology
Mjesto i datum
Verona, Italija, 11.06.2010. - 13.06.2010
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
surface roughness; ceramic inlays
Sažetak
Objective of the study was to test influence of surface roughness on material strength and durability of ceramic inlays. Results revealed significant difference for Ra values for Sof-lex discs (Ra=0, 66μm). Values for Rpm/Rz ratio showed significant difference between Hawe brushes with diamond paste comparing to Hawe brushes only (Rpm/Rz=0, 416μm). Material ratio values MR1 were significantly higher for Hawe brushes (MR1=12, 1%). Material ratio values MR2 and values for Rz and Rpm were not significantly different. Characterisation of surface can be made using Rpm/Rz ratio and Material ratio values. Smallest surface roughness was achieved with Sof-lex discs polishing system. All other tested methods are also clinically acceptable.
Izvorni jezik
Engleski
Znanstvena područja
Dentalna medicina
POVEZANOST RADA
Projekti:
065-0653147-1197 - DENTALNE TRAUME U DJECE: PREVENCIJA I LIJEČENJE (Škrinjarić, Ilija, MZOS ) ( CroRIS)
Ustanove:
Stomatološki fakultet, Zagreb
