Naslov
CONTRIBUTION OF GEAR BODY TO TOOTH DEFORMATION

Autori
Marunić, Gordana

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of XXI International Conference Trans&MOTOAUTO 13 / - Varna : Technical Union of Mechanical Engineering Bulgaria, 2013, 36-40

Skup
XXI International Conference Trans&MOTOAUTO 13

Mjesto i datum
Varna, Bugarska, 01.07.2013. - 02.07.2013

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
TOOTH DEFORMATION; THIN-RIMMED GEAR; GEAR BODY; FINITE ELEMENT ANALYSIS

Sažetak
Through applying the 3D finite element method (FEM), the investigation into a spur thin-rimmed gear tooth deformation was performed. The developed geometrical and FEM models without manufacturing errors of the engaged solid pinion and thin-rimmed wheel, enabled the torque transmission and the tooth load distribution corresponding to actual wheel structure and its deformation as a whole. For the wheel body with thin rim supported by middle web, the chosen geometrical parameters of interest were the rim and web thickness, while the value of tooth face width was kept constant. A spur tooth deformations were determined and analysed through the deformation modus of the loaded tooth mid plane along the tooth height and along the face width, for the certain gear body flexibility.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA