Pregled bibliografske jedinice broj: 677589
A Two-Step Hybrid Power System State Estimator
A Two-Step Hybrid Power System State Estimator // International Transactions on Electrical Energy Systems, 25 (2015), 7; 1158-1172 doi:10.1002/etep.1894 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 677589 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
A Two-Step Hybrid Power System State Estimator
Autori
Kirinčić, Vedran ; Skok, Srđan ; Terzija, Vladimir
Izvornik
International Transactions on Electrical Energy Systems (1430-144X) 25
(2015), 7;
1158-1172
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Hybrid state estimator ; Phasor Measurement Unit (PMU) ; power system state estimation ; synchrophasors ; Wide Area Monitoring ; Protection and Control (WAMPAC)
Sažetak
In this paper a Two-Step Hybrid State Estimator based on classical SCADA and new Phasor Measurement Units inputs is presented. The 1st step is a linear state estimator that utilizes only synchrophasors. The 2nd step is an iterative state estimator that combines conventional measurements with pseudo-measurements obtained from the 1st step. The developed hybrid model takes advantage of the high sampling frequency of the synchrophasors by running the 1st step state estimator several times between two consecutive runs of the 2nd step state estimator. The methodology was tested on the IEEE 14 and 57 buses test systems and the real full Croatian transmission power system model. It was also compared with other hybrid models. The proposed formulation of the hybrid state estimator is comparable with other hybrid models in view of accuracy and convergence, and it offers enhanced filtering of measurement errors.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Tehnički fakultet, Rijeka
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- SCI-EXP, SSCI i/ili A&HCI