Naslov
Influence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel

Autori
Pustaić, Dragan ; Cajner, Franjo

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
ABSTRACT BOOKLET - 7th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7 / Pavel Šandera - Brno : VUTIUM Brno, 2013, 225-225

ISBN
978-80-214-4739-4

Skup
7th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7

Mjesto i datum
Brno, Češka Republika, 01.07.2013. - 03.07.2013

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Heat treatment procedures; Hardening and tempering; Austempering; Mechanical properties; Fracture mechanics parameters; Crack tip opening displacement; J-integral

Sažetak
The aim of the performed investigations was to determine the influence of two different heat treatment procedures, i.e. hardening and tempering vs. austempering, on some mechanical properties, as well as the influence of these procedures on the magnitude of some fracture mechanics parameters for example, crack tip opening displacement (CTOD) and J-integral. The experimental investigations were performed on the specimens made of spring steel 65Si7 (chemical composition: 0.69% C, 1.56% Si and 0.90% Mn).

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja, Strojarstvo, Zrakoplovstvo, raketna i svemirska tehnika

POVEZANOST RADA