Pregled bibliografske jedinice broj: 663767
Finite Element Simulation of the Small Punch Test
Finite Element Simulation of the Small Punch Test // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 663767 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Finite Element Simulation of the Small Punch Test
Autori
Makaev, A.G. ; Kharchenko, V.V. ; Bukhanovskii, V.V. ; Mamuzić, Ilija
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
/ - Zagreb : Hrvatsko metalurško društvo, 2014, X-x
Skup
The 11th International Symposium of Croatian Metallurgical Society “Materials and Metallurgy”
Mjesto i datum
Šibenik, Hrvatska, 22.06.2014. - 26.06.2014
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Small Punch Test
Sažetak
In this paper influence of several key test parameters on SPT results are studied using FEM model. Small punch test (SPT) is based on testing tiny disks by means of continuous loading with a spherical indenter. Small Punch Test is used for definition of some mechanical characteristics: yielding stress and ultimate stress ; fracture toughness. For the best understanding of experiment the axisymmetric finite element model was developed. In order to simulate plasticity, damage and fracture, the continuum damage model by Gurson- Tvergaard- Needleman was used. Based on FE simulation results, deformation process of disk sample and effects of some test parameter: effect of sample thickness ; effect of friction ; effect of clamping force were studied.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Projekti:
120-1201787-1491 - Oblikovanje deformiranjem i svojstva novih metalnih materijala (Mamuzić, Ilija, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Ilija Mamuzic
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus