Pregled bibliografske jedinice broj: 659756
Investigation of causes of product surface contamination in production of alumina ceramics
Investigation of causes of product surface contamination in production of alumina ceramics // 46th International Symposium Fuels & Lubricants Scientific
Zagreb: Hrvatsko društvo za goriva i maziva, 2013. str. 123-123 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 659756 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Investigation of causes of product surface
contamination in production of alumina ceramics
Autori
Rešković, Stoja ; Brlić, Tin ; Jakovljević, Suzana ; Sladojević, Milan
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
46th International Symposium Fuels & Lubricants Scientific
/ - Zagreb : Hrvatsko društvo za goriva i maziva, 2013, 123-123
ISBN
978-953-97942-3-2
Skup
46th International Symposium FUELS & LUBRICANTS
Mjesto i datum
Poreč, Hrvatska, 16.10.2013. - 18.10.2013
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
alumina ceramic (Al2O3) ; contamination ; scanning electron microscope (SEM) ; emulsion ; carbon
Sažetak
This paper presents the results of investigating the cause of contamination in the form of brown colored stain on the surface of the alumina (Al2O3) ceramic products. Surface Contaminated ceramics surfaces were investigated by scanning electron microscope (SEM) equipped with Energy Dispersive Spectrometer (EDS). The results show that, on the contaminated part, is present carbon that does not exist in the basic raw material composition. How is in the production process used emulsion (4 % oil INA-Sinter-A and 96 % water), it was assumed that the contamination formed by stated emulsions. Research results have shown that the emulsion did not cause contamination of alumina ceramic during the manufacturing process.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Projekti:
MZOS-124-1241565-1559 - Energetska učinkovitost i kvaliteta proizvoda u plastičnoj deformaciji metala (Lazić, Ladislav, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Metalurški fakultet, Sisak