Pregled bibliografske jedinice broj: 65965
Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve
Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve // Proceedings of the 10th International DAAAM Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 1999. str. 321-322 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 65965 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Finite Element Simulation of Combined Forward-Backward Extrusion of the Body of Automatic Valve
Autori
Math, Miljenko ; Mahović, Sanjin ; Grizelj, B.
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 10th International DAAAM Symposium
/ Katalinić, B. - Beč : DAAAM International Vienna, 1999, 321-322
Skup
The 10th DAAAM International Symposium
Mjesto i datum
Beč, Austrija, 21.10.1999. - 23.10.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
forming; extrusion; finite element method; simulation
Sažetak
The process of simultaneous forward-backward extrusion the body of automatic valve for central heating installations is analyzed. The design of the tool and the manufacturing procedures are increasingly carried out by computer aided design and manufacturing (CAD/CAM). These procedures are normally based on numerical methods which take into account all physical conditions of the deformed material during the process. For this purpose, Finite Element Method (FEM) has been developed in the past in different ways. This paper highlights the finite element approach and simulation as a very useful technique in studying, where there is a generally close correlation in the load results obtained with FEM and those obtained experimentally.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
