Pregled bibliografske jedinice broj: 647664
Experimental Study of Methane Fuel Oxycombustion in a Spark-Ignited Engine
Experimental Study of Methane Fuel Oxycombustion in a Spark-Ignited Engine // Journal of energy resources technology, 136 (2013), 1; 012203-1 doi:10.1115/1.4024974 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 647664 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Experimental Study of Methane Fuel Oxycombustion in a Spark-Ignited Engine
Autori
Van Blarigan, Andrew ; Kozarac, Darko ; Seiser, Reinhard ; Cattolica, Robert ; Chen, Jyh-Yuan ; Dibble, Robert
Izvornik
Journal of energy resources technology (0195-0738) 136
(2013), 1;
012203-1
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
oxycombustion; methane; performance
Sažetak
An experimental investigation of methane fuel oxycombustion in a variable compression ratio, spark-ignited piston engine has been carried out. Compression ratio, spark-timing, and oxygen concentration sweeps were performed to determine peak performance conditions for operation with both wet and dry exhaust gas recirculation (EGR). Results illustrate that when operating under oxycombustion conditions an optimum oxygen concentration exists at which fuel-conversion efficiency is maximized. Maximum conversion efficiency was achieved with approximately 29% oxygen by volume in the intake for wet EGR, and approximately 32.5% oxygen by volume in the intake for dry EGR. All test conditions, including air, were able to operate at the engine's maximum compression ratio of 17 to 1 without significant knock limitations. Peak fuel-conversion efficiency under oxycombustion conditions was significantly reduced relative to methane-in-air operation, with wet EGR achieving 23.6%, dry EGR achieving 24.2% and methane-in-air achieving 31.4%. The reduced fuel-conversion efficiency of oxycombustion conditions relative to air was primarily due to the reduced ratio of specific heats of the EGR working fluids relative to nitrogen (air) working fluid.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Darko Kozarac
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus