Pregled bibliografske jedinice broj: 645968
Control-Oriented Modeling and Experimental Identification of an Ultracapacitor Module
Control-Oriented Modeling and Experimental Identification of an Ultracapacitor Module // 17th International Conference on Electrical Drives and Power Electronics, EDPE 2013 (CD Proceedings) / Kolonić, Fetah ; Matuško, Jadranko (ur.).
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2013. str. 254-259 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 645968 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Control-Oriented Modeling and Experimental Identification of an Ultracapacitor Module
Autori
Pavković, Danijel ; Hrgetić, Mario ; Komljenović Ante
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
17th International Conference on Electrical Drives and Power Electronics, EDPE 2013 (CD Proceedings)
/ Kolonić, Fetah ; Matuško, Jadranko - Zagreb : Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2013, 254-259
ISBN
978-953-56937-8-9
Skup
17th International Conference on Electrical Drives and Power Electronics, EDPE 2013
Mjesto i datum
Dubrovnik, Hrvatska, 02.04.2013
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Ultracapacitors; modeling; identification; DC/DC converter; current control; simulation
Sažetak
This paper presents the results of experimental identification of control-oriented lumped-parameter model of an ultracapacitor module suitable for energy management and state-of-charge (SoC) estimation applications. For the purpose of identification a custom-built test setup comprising current-controlled DC/DC converter has been utilized. The ultracapacitor capacitance vs. voltage curve identification is based on the constant-current charging/discharging tests, while the identification of the overall ultracapacitor admittance model (comprising capacitance and internal resistance effects) is based on ARX process model representation. Thus obtained ultracapacitor model parameters are then used to build control-oriented ultracapacitor simulation models, which are validated against the experimentally-recorded data.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
120-0361621-1896 - MODELIRANJE I UPRAVLJANJE HIBRIDNIM VOZILIMA (Petrić, Joško, MZOS ) ( CroRIS)
120-1201773-1771 - Regulacija i estimacija dinamike vozila (Deur, Joško, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
