Naslov
The possibilities and advantages of a high temperature carbonitriding of the equipment parts worn by combined mechanisms

Autori
Marušić, Vlatko ; Rosandić, Željko ; Marušić, Luka

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings Vol.1 / Dašić, Predrag V. - Lahti : SaTCIP, 2013, 69-77

ISBN
978-86-6075-042-8

Skup
13th international conference Research and Development in Mechanical Industry RaDMI 2013

Mjesto i datum
Kopaonik, Srbija, 12.09.2013. - 15.09.2013

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
tribosystem; combined wearing; high temperature carbonitriding

Sažetak
The worm press tribosystem was selected as an example in which the components are worn by combined mechanisms, abrasion and fatigue. Several types of worm presses were analyzed in detail. It was found that a decrease of installed capacity efficiency in the newer press construction appears much faster as the result of pronounced local damage of worn parts. The most probable cause is not only in the materials (coatings) of the tribocouple but also in the inadequate construction solutions of the press parts. The possibility of changes in the procedure of extraction cage knives production was analysed. Considering the properties reached by high temperature carbonitriding of test samples, it is possible to point out the advantages of using the high temperature carbonitriding compared to cladding.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA