Pregled bibliografske jedinice broj: 636116
THE INFLUENCE OF VISIBILITY CONDITIONS IN HORIZONTAL ROAD CURVES ON THE EFFICIENCY OF NOISE PROTECTION BARRIERS
THE INFLUENCE OF VISIBILITY CONDITIONS IN HORIZONTAL ROAD CURVES ON THE EFFICIENCY OF NOISE PROTECTION BARRIERS // VIth INTERNATIONAL SCIENTIFIC CONFERENCE: “Road Research and administration” - CONFERENCE PAPERS e-proceedings / Răcănel, Carmen (ur.).
Bukurešt: Conspress, 2013. str. 827-837 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 636116 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
THE INFLUENCE OF VISIBILITY CONDITIONS IN HORIZONTAL ROAD CURVES ON THE EFFICIENCY OF NOISE PROTECTION BARRIERS
Autori
Džambas, Tamara ; Ahac, Saša ; Dragčević, Vesna
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
VIth INTERNATIONAL SCIENTIFIC CONFERENCE: “Road Research and administration” - CONFERENCE PAPERS e-proceedings
/ Răcănel, Carmen - Bukurešt : Conspress, 2013, 827-837
ISBN
978-973-100-290-3
Skup
INTERNATIONAL SCIENTIFIC CONFERENCE, Road Research and Administration, “CAR 2013”
Mjesto i datum
Bukurešt, Rumunjska, 04.07.2013. - 05.07.2013
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
visibility; horizontal curves; noise protection barriers
Sažetak
Ensuring sufficient visibility on planned roads by sight distance testing is an integral part of every project, but problems with visibility can emerge when noise barriers are erected on existing roads. Namely, in order to provide sufficient noise protection, high noise barriers are often placed at minimum distance from the carriageway edge, and additional visibility testing in most cases is not carried out. Research described in this paper consists of stopping sight distance tests conducted by means of specialized road design software MX Road, and noise barrier optimization conducted by means of specialized noise prediction software LimA using static noise calculation method RLS 90. The aim of this research is to establish whether the required stopping sight distance on road sections where minimum design parameters are applied can be achieved if the noise barrier is placed at minimum distance from the carriageway edge, and to establish whether the optimized dimensions of planned noise protection barrier will change if the barrier is placed on larger distance from the noise source, which is, in this case, the existing road.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Projekti:
082-1102147-2153 - Buka cestovnog prometa - monitoring i mjere zaštite (Dragčević, Vesna, MZOS ) ( CroRIS)
Ustanove:
Građevinski fakultet, Zagreb