Naslov
Composite joint of timber truss girders

Autori
Rajčić, Vlatka ; Pavković, Krunoslav ;

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Enhance mechanical properties of timber, engineered wood products and timber structures / Kay-Uwe Schober - Bath : University of Bath, 2012, 20-23

ISBN
978-1-85790-176-2

Skup
COST Action 1004 - Early Stage Researcher Conference Enhance mechanical properties of timber, engineered wood products and timber structures

Mjesto i datum
Zagreb, Hrvatska, 19.06.2012. - 20.06.2012

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
composite joints; timber truss girder

Sažetak
In this paper the possibility of joining elements of timber truss girder with "built-in" connection will be explored. The joint will be based on glued-in steel rod, glass and/or carbon fiber-reinforced timber element and built-in steel tube which takes the tensile force. Fibre-reinforce textile will be implemented locally between the timber layers, in adhesion layer. Glue laminated timber elements will be laminated horizontally as opposed to the usual used vertical lamination. The study of this joint will be conducted experimentally and numerically. Experimental testing will be conducted on a somewhat smaller number of specimens with applied load at angle 0°, 45° and 90° to the grain and on the prototype of truss girder. Fields not explored by experimental laboratory testing , will be explored by examining the complex numerical models.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo

POVEZANOST RADA