Pregled bibliografske jedinice broj: 630040
Locally Reinforced Laminated Timber with Glass Fiber Glued-in between the Timber Layers
Locally Reinforced Laminated Timber with Glass Fiber Glued-in between the Timber Layers // ECCM15 Composites at Venice / Quaresimin, Marino (ur.).
Lahti, 2012. 1566, 8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 630040 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Locally Reinforced Laminated Timber with Glass Fiber Glued-in between the Timber Layers
Autori
Pavković, Krunoslav ; Haiman, Miljenko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
ECCM15 Composites at Venice
/ Quaresimin, Marino - Lahti, 2012
ISBN
978-88-88785-33-2
Skup
European Conference on Composite Materials
Mjesto i datum
Venecija, Italija, 24.06.2012. - 28.06.2012
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
rešetkasti nosač ; ulijepljene šipke ; tkanina od staklenih vlakana
(truss girder ; glued-in steel bars ; fiberglass)
Sažetak
Research of truss girder joint based on the steel pipe placed in bottom and top cord and steel rods glued-in web member, requires local reinforcing of laminated timber in the zone of steel pipe. In this paper the reinforcing of wooden laminated element at the connection areas will be point out. Tests on 120mm width, 200mm high and 1000mm long specimens loaded perpendicular to the grain through a steel tube 50mm in diameter will be carried out. Numerical models with material and geometric nonlinearities were made with Abaqus /CAE for both series, reinforced and no reinforced timber.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Ustanove:
Arhitektonski fakultet, Zagreb,
Tehničko veleučilište u Zagrebu