Naslov
Coolants quality in-situ tests

Autori
Duspara, Miroslav ; Vukušić, Zdravko ; Mijušković, Goran, Stoić, Antun

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Sustainable life in manufacturing SLIM 2012 / Oguz, Colak ; Kopač, Janez - Istanbul : CAD/CAM research and application center, Laboratory of Cutting, 2012, 129-135

ISBN
978-9944-452-61-8

Skup
SLIM 2012

Mjesto i datum
Istanbul, Turska, 02.09.2012. - 05.09.2012

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
coolants; quality test; nitrates; nitrites; concentration of emulsion

Sažetak
Coolants and lubricants are implemented into the industry production to improve characteristics of the tribological processes that are always present on the contact surfaces of tool and workpiece during machining. Use of these resources increases productivity, improves the surface quality, decrease costs and consequently increases the total profit. In this paper, samples of emulsions from three different companies were collected and two different tests were conducted. The first test is performed with measuring strips and measured the concentration of nitrates, nitrites, water hardness and pH. In the second test with refractometer the emulsion concentrates, emulsions index and temperature of the emulsion were measured. Maximum values of nitrates, nitrites, concentration of emulsion, pHs are shown in this paper. Measuring data that exceed the limit values are additionally observed and recommendations are given.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA