Naslov
Structural transformation of steel induced by application of oxyfuel gas cutting using acetylene and propane/butane mixture

Autori
Schauperl, Zdravko ; Kožuh, Zoran ; Kralj, Slobodan ; Šnajdar, Mateja ; Glogović, Zlatko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings Book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka - Sisak : Metalurški fakultet Sveučilišta u Zagrebu, 2012, 407-418

ISBN
978-953-7082-14-7

Skup
12th International Foundrymen Conference

Mjesto i datum
Opatija, Hrvatska, 24.05.2012. - 25.05.2012

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
oxyfuel gas cutting; acetylene; propane-butane; microstructural changes

Sažetak
In metal processing industry oxyfuel gas cutting is a widespread and common procedure for cutting steel. This procedure is usually the first operation in material preparation whose objective is producing cutting surface ready for the next operation, usually welding. Experimental part of this study deals with influence of oxyfuel gas cutting with use of acetylene and propane-butane mixture on microstructure and hardness of low- alloyed high-strength steel S960 QL. Significant differences in microstructure and hardness of cutting surfaces as well as heat-affected zone size have been determined for surfaces created by cutting with acetylene and those created by oxyfuel-cutting with use of propane-butane mixture. Decarburization along the edges of cutting surface has also been established regardless of type of gas used during cutting or of the fact that preheating was conducted.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Strojarstvo

POVEZANOST RADA