Pregled bibliografske jedinice broj: 605677
Tests of paintings applied on the KONOX 315 S steel
Tests of paintings applied on the KONOX 315 S steel // Proceedings "Corrosion in power industry 2012" / J. Kocich (ur.).
Košice: Technical University of Košice, Faculty of Metallurgy, 2012. str. 81-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 605677 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Tests of paintings applied on the KONOX 315 S steel
Autori
Lackova, Petra ; Hagarova, Maria ; Mamuzić, Ilija
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings "Corrosion in power industry 2012"
/ J. Kocich - Košice : Technical University of Košice, Faculty of Metallurgy, 2012, 81-84
Skup
22<sup>nd</sup> International Conference "Corrosion in Power Industry" 2012
Mjesto i datum
Košice, Slovačka, 15.05.2012. - 16.05.2012
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
steel KONOX 315S; corrosion; painting surface
Sažetak
The purpose of laboratory tests of samples was to determine the influence of surface pre-treatment of steel KONOX 315S on the painting quality. The painting adhesion was quantified by standardized procedure in 5 specific modes of pre-treatment of steel surface. The best adhesion has painting on the ground surface. The order of adhesion was following: ground surface, surface with oxide layer, pre-corroded surface. This order determines the order of expected protective function of painting on steel surface in atmosferic environment too.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Projekti:
120-1201787-1491 - Oblikovanje deformiranjem i svojstva novih metalnih materijala (Mamuzić, Ilija, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Ilija Mamuzic
(autor)
