Pregled bibliografske jedinice broj: 603987
Application of water jetfor cutting polymer materials
Application of water jetfor cutting polymer materials // Metalurgija, 52 (2012), 2; 255-258 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
CROSBI ID: 603987 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Application of water jetfor cutting polymer materials
Autori
Stoić, Antun ; Duspara, Miroslav ; Kosec, B. ; Stoić, Marija ; Samardžić, Ivan
Izvornik
Metalurgija (0543-5846) 52
(2012), 2;
255-258
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopćenje, znanstveni
Ključne riječi
Polimer material (PAG) ; water jet cutting ; PA6 ; cutting parameters
Sažetak
Due to the nature of polymeric materials, during thermal cutting processes it leads to their melting, and therefore appear errors in the final product. This paper a „cold“ process of cutting polyamide 6 ie. SIPAS 60, where there are given the characteristics of materials and guidelines for satisfactory quality of process. The authors made the cut experiment 32 were they changed the cutting parameters (cutting pressure, cutting feed and abrasive mass flow) ; the surface roughness was measured by the depth of material, because the roughness changes with the thick-ness of the material to be cut.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-0000000-3309 - Suvremene tehnike obrade rezanjem u proizvodnji prihvatljivoj okolišu (Stoić, Antun, MZOS ) ( CroRIS)
152-1521473-1474 - Napredni postupci izravne izradbe polimernih proizvoda (Raos, Pero, MZOS ) ( CroRIS)
152-1521473-1476 - Suvremene tehnologije spajanja lakih strojarskih konstrukcija (Samardžić, Ivan, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod,
Veleučilište u Slavonskom Brodu
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
