Pregled bibliografske jedinice broj: 602059
ELECTROCHEMICAL CHARACTERISATION OF OIL PIPELINE INTERNAL CORROSION PRODUCTS BY VOLTAMMETRY OF IMMOBILIZED MICROPARTICLES
ELECTROCHEMICAL CHARACTERISATION OF OIL PIPELINE INTERNAL CORROSION PRODUCTS BY VOLTAMMETRY OF IMMOBILIZED MICROPARTICLES // Book of abstracts/ 19th Young Investigators Seminar on Analytical Chemistry
Nova Gorica, 2012. str. 37-37 (predavanje, nije recenziran, sažetak, znanstveni)
CROSBI ID: 602059 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
ELECTROCHEMICAL CHARACTERISATION OF OIL PIPELINE INTERNAL CORROSION PRODUCTS BY VOLTAMMETRY OF IMMOBILIZED MICROPARTICLES
Autori
Sabolić, Ivana ; Šmidt, Sanja ; Valek Žulj, Lidija ; Martinez, Sanja
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of abstracts/ 19th Young Investigators Seminar on Analytical Chemistry
/ - Nova Gorica, 2012, 37-37
ISBN
978-961-6311-72-4
Skup
19th Young Investigators Seminar on Analytical Chemistry - YISAC 2012
Mjesto i datum
Nova Gorica, Slovenija, 27.06.2012. - 30.06.2012
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Nije recenziran
Ključne riječi
carbon paste; voltammetry; immobilized microparticels; corrosion products
Sažetak
Laboratory analysis of corrosion products from inside the pipeline can provide the information that enable determination of cause of corrosion damage. Researchers may apply a range of analytical techniques, like XRD, HPLC, AAS, GC, MS, or the range of spectroscopic analysis of surface, like SEM/EDS, TEM, AES, SIMS, FTIR if available. In this study we have tried to apply a simple electrochemical method of voltammetry of immobilized microparticles that has been used for the identification of microsampled corrosion products from historical and archaeological bronzes, to analysis of corrosion products from inside of oil pipeline. The methodology is simple, cheap and quick way to obtain the information on very small amount of sample. Corrosion products from inside the oil pipeline were analyzed by cyclic voltammetry at the carbon paste electrode. The microparticles of corrosion products were immobilized to carbon paste by gently pulling the electrode over the sample. The electrode was transferred into the electrochemical cell where direct oxidation or reduction of electroactive species was performed. Measurements conducted on brown and black corrosion products confirmed the difference in the composition of samples. Constituent phases were determined by comparing the cyclic voltammograms and electrochemical parameters to those of reference compounds. The reduction peak at negative potentials attributed to reduction of Fe(III) species and oxidation peak attributed to oxidation of Fe(II) species were identified. The electrode processes differed for the two samples and different media. Cyclic voltammograms were measured in 0.5 M HCl and oxalic acid solution to determine behavior of corrosion products in different complexing media. Cyclic voltammograms measured in oxalic acid revealed more pronounced peaks and better resolved measurements.
Izvorni jezik
Engleski
Znanstvena područja
Kemija, Kemijsko inženjerstvo
POVEZANOST RADA
Projekti:
125-0822161-2982 - INHIBICIJA KOROZIJE PRIRODNIM SPOJEVIMA: OD MOLEKULSKIH MODELA DO PRIMJENE (Martinez, Sanja, MZOS ) ( CroRIS)
Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb