Naslov
Flank wear in up and down milling

Autori
Jozić, Sonja ; Bajić, Dražen ; Topić, Sandra

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinic, Branko - Beč : DAAAM International Vienna, 2012, 251-254

ISBN
978-3-901509-91-9

Skup
23rd International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Sustainability

Mjesto i datum
Zadar, Hrvatska, 24.10.2012. - 27.10.2012

Vrsta sudjelovanja
Ostalo

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
flank wear; design of experiments; regression analysis; material removal rate

Sažetak
This study is carried out to observe the flank wear in up and down milling in the case of peripheral milling. Equations for flank wear have been obtained by means of design of experiments and regression analysis. This research has shown that the time of inserts engagement has the largest influence on flank wear and the radial depth of cut the least in down milling. In up milling time of inserts engagement and cutting speed have the approximately equal influence. Hereinafter, flank wear correlated with the volume of the removed material for different processing parameters has been analysed. Observed from the viewpoint of removed material and flank wear, down milling is favorable compared to the up milling.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA