Pregled bibliografske jedinice broj: 597361
On the displacements of container ship hull girder under torsion
On the displacements of container ship hull girder under torsion // Knjiga sažetaka XX. Simpozija Teorija i praksa brodogradnje in memoriam prof. Leopold Sorta / Žiha, Kalman (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2012. str. 75-75 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 597361 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
On the displacements of container ship hull girder under torsion
Autori
Pavazza, Radoslav ; Plazibat, Bože ; Vukasović, Marko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Knjiga sažetaka XX. Simpozija Teorija i praksa brodogradnje in memoriam prof. Leopold Sorta
/ Žiha, Kalman - Zagreb : Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2012, 75-75
ISBN
978-953-7738-20-4
Skup
XX. simpozij Teorija i praksa brodogradnje SORTA 2012
Mjesto i datum
Zagreb, Hrvatska, 27.09.2012. - 29.09.2012
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Domaća recenzija
Ključne riječi
Theory of thin-walled beams ; Torsion ; Influence of shear ; Open sections and closed-open sections ; Analytics ; FEM
Sažetak
An analytical approach to torsion of thin-walled beams of open section with one plane of symmetry is considered. The theory of torsion of thin-walled beams of open section with influence of shear, based on the classical Vlasov’s theory of thin-walled beams of open section, as well as the Umansky’s theory for closed-open sections, is applied. The general transverse loads act in the beam walls, reduced to the moments of torsion with respect to the principal pole (torsion/shear centre) only. The beam will be subjected to torsion with influence of shear with respect to the principal pole and in addition to bending due to shear in the horizontal plane trough the principal pole. The obtained analytical expressions for displacements are applied in the analysis of displacements of the modern container ship hull girder subjected to torsion, as well as in the parametric analysis of simple U sections. Comparisons with the finite element method by applying shell elements are provided.
Izvorni jezik
Engleski
Znanstvena područja
Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
023-0231744-3010 - Deplanacija i distorzija tankostjenih presjeka (Pavazza, Radoslav, MZOS ) ( CroRIS)
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split