Naslov
Influence of orientation and UV radiation on the mechanical properties of FDM prototype

Autori
Pilipović, Ana ; Godec, Damir ; Šercer, Mladen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 4th International Conference on additive Technologies - iCAT 2012 / Drstvenšek, Igor ; Zupančič Hartner, Tjaša ; Katalinić, Branko ; Dolinšek, Slavko - Maribor : DAAAM International Vienna, 2012, 1-8

ISBN
978-3-901509-92-6

Skup
4th International Conference on Additive Technologies iCAT 2012

Mjesto i datum
Maribor, Slovenija, 19.09.2012. - 21.09.2012

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
FDM; orientation; atmospheric conditions

Sažetak
Products made by additive technologies are increasingly replacing the products made by classical procedures of polymer processing, e.g. injection moulding. The current market requires the products to be of good mechanical properties, low prices, and complicated geometry. With the procedure such as Fused Deposition Modelling it is possible to produce a product of relatively low price and good mechanical properties. In practice it is impossible to avoid manufacturing of products in different orientation in working area of machine, and using the products in various atmospheric conditions (e.g. UV radiation) either intentionally or unintentionally. It is therefore necessary to determine how orientation of products and UV light, after a longer exposure, affects the final mechanical properties of the products.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA